Parts & Accessories
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
S2-Snap BOA cartridge assembly kit for personalizing your shoes. Includes: One left cartridge dial assembly, one right cartridge dial assembly, two laces. Compatible with the following models: - S-Works Road - S-Works XC - Women’s S-Works XC - Pro XC - Women’s Cascade - Rime Expert - Comp MTB - Women’s Motodiva
$9.99 - $10.00
Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection
If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Element Toe Covers, history is doomed to repeat itself this winter. Soft Shell fabrics are synonymous with unrivaled protection and quality and this is for a good reason. It provides amazing levels of wind and water resistance, without sacrificing anything to breathability. This means that your toes are going to stay warm and protected, not wet and clammy. And with abrasion resistance at key points of the construction, you'll be receiving these warming advantages for seasons to come. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Fabric Content: Knit 44% Polyester, 38% Nylon, 14% Elastane, 4% PU. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Universal cleat opening means that the covers are compatible with both road and mountain shoes.
Depending on where you live and ride, full shoe covers might be a little too aggressive for the conditions at hand. That isn't to say that it isn't cold, though—you just might be better suited with something like Specialized Element Windstopper Toe Covers, instead. These toe covers feature a Gore Windstopper Soft Shell construction that ensures superior levels of breathable insulation, plus reliable resistance to both wind and water. The result? Warmth and protection right where you need it, without running the risk of overheating. - Gore Windstopper Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Small/Medium: sizes 38 – 43 - Large/X-Large: sizes 44 – 48
- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low-profile - Replaces without tools
$15.00 - $16.99
Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws
$39.99 - $65.00 $65.00 Up to 38% Off
Reluctant brides and ambivalent grooms might still get cold feet, but with a pair of Bontrager's RXL Stormshell MTB Shoe Covers on, you never will. They're windproof, waterproof, and incredibly toasty thanks to the Profila fleece-backed interior. Plus, there are waterproof zippers on the back for easy on/off, reflective accents for enhanced visibility, and they're compatible with all mountain pedal systems and cleats. - Small: 39 – 40 - Medium: 41 – 42 - Large: 43 – 44 - X-Large: 45 – 46 - XX-Large: 47 – 48
$39.99 - $70.00 $70.00 Up to 43% Off
Get ready for winter with Bontrager's RXL Waterproof Softshell Shoe Covers. Shearling-backed Profila Stormshell fabric is windproof, waterproof, and offers great insulation to keep your toes warm. A waterproof zipper makes these booties easy to get on and off and reflective details increase your visibility on the road. These booties are compatible with any road cleat system. - Small (39-40) - Medium (41-42) - Large (43-44) - X-Large (45-46) - XX-Large (47-48)
$60.00 - $70.00
Extend your cycling season Round out your cycling wardrobe with one of our most popular autumn road products. The S1 Softshell Shoe Cover keeps you warm, dry, and protected in rainy or dry conditions above freezing. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Visibility colorway uses biomotion to help improve daytime detectability - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective elements enhance visibility during nighttime riding
Get the advantage of more grip with the Sabertooth Toe Spike Kit. The super-strong forged aluminum design easily mounts to any mountain bike shoe with front toe ports for a tighter grip when navigating cyclocross barriers, run-ups, and any off-bike section in less than ideal conditions. Key features: - Aggressive, earth-churning design - Made from precision forged stainless steel - Includes stainless steel mounting hardware
Dry feet equal happy feet For the wettest days when it seems the precipitation is never going to let up, the Waterproof Shoe Cover has you covered and will keep your feet warm and dry. Thanks to a thermal fleece lined fabric that traps body heat and taped seams with a waterproof YKK zipper, water stays out and warmth stays in. Product details - Fleece lined Stormshell fabric is waterproof while trapping warmth - YKK waterproof zipper and taped seams for ultimate protection and reliability - Designed for use with road or mountain shoes for maximum versatility Specifications - Temperature use (high): 75 deg. F - Temperature use (low): 55 deg. F - Waterproof Rating: 10,000mm - Fiber content: 45% Nylon / 35% Polyurethane / 20% Polyester - Material: Woven - Sole Construction: Closed with holes for clips
Protect your little piggies With the Windshell Toe Cover, your feet retain an extra dose of warmth thanks to windshell material that is windproof and water-resistant no matter if riding on the road or mountains. - Windshell material provides insulation and protection during windy and wet riding - Integrated pull tabs for easy on and off - Designed for use with road or mountain shoes for maximum versatility - Soft elastic band above ankle for added coverage and comfort Specifications - Temperature use (high): 70 deg. F - Temperature use (low): 50 deg. F - Fiber content: 78% Rubber / 15% Nylon / 7% Polyester - Material: Woven - Sole Construction: Closed with holes for clips
Proper alignment starts here Bontrager inForm BioDynamic insoles with Superfeet are engineered to harmonize the interface between body, shoe, and bike, giving you the complete foot support you need to ensure mile after mile of pain-free pedaling. Models are color-coded: - Red = Low Arch - Yellow = Mid Arch - Blue = High Arch - Engineered for unparalleled foot control, pedaling efficiency, and comfort - 3D Arch Pillar provides optimal arch support for improved knee alignment - Precision molded heel cup helps stabilize and align the foot - Footrest metatarsal pad helps reduce or eliminate hot foot - inForm BioDynamics—Optimizes natural movement for sustained, higher performance
Mother Nature is always in flux, but mankind is both smart and adaptable. In other words, whenever she changes her mood, we always have the right tool for the job. And when that job is protecting against blustery, cold conditions, the right tool is our Deflect Comp Shoe Covers. Compared to our Element line of shoe covers, Deflect places more of a focus on wind resistance, so you'll find a stretchable construction with lightweight insulating properties. And to make getting in and out of the covers easy, we also included a rear zipper. - Deflect fabrics feature a good amount of stretch and a brushed back interior to ensure a light level of insulation. - Abrasion-resistant bottom and toe panels increase the lifespan. - A universal cleat opening makes these covers compatible with either road or mountain shoes. - Reflective elements - Rear Velcro closure
For a little extra protection in the cold for your toes, slip on a pair of the Element Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Rear zipper closure securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Fabric Content: MAIN: 44% Polyester, 38% Nylon, 14% Elastane, 4% PU; TOE & HEEL: 100% Polyester
$30.00 - $35.00
When warm socks aren't enough, but waterproof shoe covers are too much, our Reflect Overshoe Socks are your ticket to warm toes. They're made from an abrasion-resistant, knitted yarn that not only adds an extra layer of warmth, but ensures you'll be using them for seasons to come. At the top of the overshoe, you'll find a reflective band that helps increase your visibility in low light conditions. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibility to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
Wore out the laces on your S-Works Sub6 shoes? Don't fret, Specialized has your replacement laces right here. Now lace 'em up and get riding. - 110cm: Shoe Size 36-41 - 120cm: Shoe Size 41.5-43 - 130cm: Shoe Size 43.5-45 - 140cm: Shoe Size 45.5-49
$16.95 $25.00 32% Off
If you lost or damaged the Warp Sleeve on S-Works Sub6 road shoes, you have no reason to fear—Specialized has the replacement. Pick up a pair and start saving those seconds again.
Stripped, worn-out—whatever happened to your three-hole cleat attachment is between you and your shoes…or maybe between your shoes and your cleats. Either way, Specialized has a T-Nut replacement kit that's easy to install and even easier than buying a new pair of shoes.
Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam
Our best-selling shoe cover, this piece slips easily over road shoes to add warmth and wind protection for cool weather riding. Our AmFIB toe cover is the perfect answer to cool weather. Its softshell fabric offers terrific protection from wind and rain and is as easy to pull on as a sock. We have increased the stretch to accommodate wider shoes and sizes on the bubble. The opening is sized for any three-bolt cleat. - AmFIB Softshell provides superior wind and water protection. - Simple pull-on design. - BioViz reflective elements for low-light visibility. - For road shoes with external cleats.
Use these easy-to-slip-on covers over your treaded MTB shoes to keep your feet warm and dry in the sloppiest riding conditions. - P.R.O. Barrier WxB fabric provides optimal wind and water protection - Fleece lined interior for warmth - Waterproof, taped external seams - Second generation two stage hook and loop closure provides both sleek fit and easy on and off - Durable Kevlar bottom holds up to trail use - Synthetic leather toe bumper adds scuff protection - Bottom is designed to fit treaded MTB style shoes - BioViz high visibility colors and reflective elements
When the conditions get wet, keep pedaling with warm and dry feet in these easy-to-slip-on, wind- and water-protective covers. - P.R.O. Barrier WxB fabric provides optimal wind and water protection - Fleece lined interior for warmth - Waterproof, taped external seams - Second generation two stage hook and loop closure provides both sleek fit and easy on and off - Durable rubber toe area provides superior traction on wet surfaces - For road shoes with external cleats - BioViz high visibility colors and reflective elements
Let's get real; toe covers are a great way to deal with cold weather. They can be pulled over the toe of most cycling shoes and left on for the whole winter, and people do more miles on 45-degree days than they do on 25-degree days (even in Canada). Our toe cover uses our AmFIB softshell fabric to keep out the wind and rain and we positioned the band to sit behind toe spikes so that they will work with road or mountain shoes. Kevlar on the underside increases durability while the hook-and-loop closure makes the fit adjustable and the mounting quick. - AmFIB Softshell provides superior wind and water protection. - Innovative power-band secures front of shoe cover under toes. - Kevlar bottom with hook-and-loop closure allows easy on and off. - BioViz reflective elements for low-light visibility. - For road or mountain bike shoes.
Rugged Protection For Dirty Days On Your Mountain Bike Endura was among the first to employ neoprene in bike overshoes. A core stalwart of our collection, the MT500 Overshoe has been a best-seller for many years. Here in Scotland, we know a thing or two about foul weather gear, and this latest evolution of our waterproof durable mountain bike overshoe is the result of years of testing in the worst possible conditions. Endura’s unique molded rubber toe cap with a treaded underside provides grip when climbing steep and muddy slopes. The stand-out feature of Endura's MT500 Overshoe, and the one that sets it apart from the rest of the competition, is the molded rubber toe cap. This has been totally revamped with improved tread on the underside that gives you plenty of grip on steep, muddy slopes and also includes additional reinforced areas that improve the durability of the overshoe. Neoprene is the perfect material to construct overshoes from. Not only does it provide water and wind protection but it also adds an insulating layer over your foot. This keeps your circulation going allowing you to ride for longer in comfort, whatever the weather. - Tough nylon-faced neoprene upper - Offset rear zip with snap-down puller and zip guard - Molded rubber toe cap with treaded underside to help climb steep muddy slopes - Asymmetric front seam for improved fit - Hard-wearing reinforced sole protects the bottom of the overshoe from rocks and pedals - Crank-rub protection - Reflective detailing - Suitable for MTB cleats only - 90-day Satisfaction Guarantee
Best-Selling Waterproof Neoprene Overshoe That Insulates And Protects Your Feet From The Rain And Cold—Universally Loved By Roadies Worldwide. Endura was the first to employ neoprene in bike overshoes. Not wanting to rest on our laurels, we have revamped our core road overshoe with several new features to keep it one step ahead of the competition. A core stalwart of our collection, the neoprene Road Overshoe has been a best-seller in our range for many years. Here in Scotland, we know a thing or two about wet weather gear and this waterproof durable overshoe is the result of years of testing in the worst possible conditions. Comfort was a key consideration when updating the Road Overshoe. To improve pedaling comfort, the decision was taken to off-set the rear zip, moving it away from the flex point behind your ankle reducing the chance of it digging in. Smooth neoprene outer face creates a surface that water naturally runs off, keeping your feet warm and dry inside. A durable sole with cleat access points stitched with a bulletproof aramid thread that extends the lifespan of our product beyond more flimsy alternatives on the market. - Smooth neoprene construction and welded asymmetric seam give super-smooth styling and waterproofing - Offset rear zip with snap-down puller and zip guard - Crank-rub protection print - Reflective rear zip tape - Hard-wearing stitching using aramid thread
- Stretch waterproof PU fabric with taped center front seam - Extensive 360-degree reflective trim on front, side, and rear - Flatlocked seams for additional durability - Opens fully at sole and up back heel with Velcro fastening for an adjustable fit - Stretch aramid abrasion resistant sole and toe - Suitable for all kinds of footwear and cleats
DeFeet's Slipstream Shoe Covers fit snugly over your shoes to shield you from the cold and provide an aerodynamic advantage too. They also protect your shoes from weather and debris.
Page 1 of 2 Next page